Archive for June, 2007

Eric Burdon and the Animals

Saturday, June 30th, 2007

Eric Burdon and the Animals, originally uploaded by maxkelley.

This was a great performance by Eric Burdon and the Animals.. you should have been there when they played House of the Rising Sun.. the crowd was just so powerful and everyone was so happy.

(Eric isn’t actually in this picture… whoopsies.

Cue-Cat Surgery

Wednesday, June 27th, 2007

Well, I’m back, my friends, and with more fun than ever! I have this cool little barcode scanner that looks like a cat, and was distributed at RadioShack and with issues of Forbes Magazine with the intention of allowing people to get information on an item just by swiping its barcode! Well, the idea tanked, and Digital Convergence, the company that marketed these hoobywhatties went down with the ship! So, I just use mine to inventory things in my homemade web script, called BarcodeDB… check it out!

IMG_2605.png

Anywho, a while back I decided to add a switch so that the CueCat isn’t on all the time, since the red LED gets annoying after a bit.. All the connections to this CueCat is in-line with the keyboard, over P/S2 cable, and on the board of the cuecat, all connections from this cable comes in on a 6-pin plastic connector which goes with a 6-pin header on the PCB.

IMG_2557.png

After many bad soldering attempts, the plastic connector sorta.. melted, and the wires had to be cut and soldered to the pins. Mind you, the pins are pretty close together, and is not much fun. So, I decided to use an IDE cable, and make my own connector!

IMG_2565.png

I cut the IDE cable with an X-ACTO knife heated by a blowtorch, and you can split the ribbon cable with your fingers. (Give yourself a pin’s space when cutting: so if you are cutting a 6-pin connector, cut right inbetween the 7th and 8th pins, because the heat from the X-ACTO melts plastic around it) I simply tinned the ends, and soon, I was able to begin attaching the wires that come from the PS/2 cord.

IMG_2576.png

Ah, but wait, Max, where do these wonderfully coloured wires go? Well, my friends, I wrote up a nice slip of paper, detailing these.. details. Pin 1 refers to the pin near the silkscreened “1″ on the board… you’ll find it.

IMG_2574.png

Found them? Good! Allow you need to do is solder the wires together!

IMG_2582.png

(I apologize.. this picture was taken before I properly soldered the yellow and silver wires.. all the others were out of focus) Now, if you are like me, you have a switch planted in the top of your CueCat. Now, Max, you ask, how do I make the switch work? Well, grasshopper, given that you have soldered wires to your switch contacts, like I (if not, no biggie.. just do.), you can simply solder the brown wire to one side and the other switch contact’s wire to the first pin wire on the IDE cable.

IMG_2588.png

All good? OK! Well, all there is left to do is put tape on the wires (I ran out of electrical, so I used painter’s tape)

IMG_2592

All there’s left to do is box it back up! Make sure to put the plastic lenses back where they came from, otherwise our feline friend won’t work so well..

IMG_2600_final

And the black plastic cover on that, too.. Tuck the cable in its little niche (takes some squeezing)

IMG_2598.png

And box it up!

IMG_2605.png

Does it work, you ask? Well of course! Anything I do is always a success! This image…

IMG_2609.png

Was shortly followed by this image…

IMG_2610.png

Which may lead you to make a conclusion about this project! Good luck, and happy hacking, guys!

Deficiency in Postulative Activity

Monday, June 25th, 2007


Sweet, Kevlar Goodness, originally uploaded by maxkelley.

Oh, boy.. this is sad.. I haven’t posted in like… 2 months.. I will tommorow, I promise.. just let me go to bed first.. it’s 1:32!